Prices include GST. Prices do not include shipping.
More than just a way to power your camera, the RED DSMC2 V-Lock I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.
RED DSMC2 I/O V-Lock Expander Module
Material of Construction
BRAIN: 4 x M4 mounting Screws
Expander-to-BRAIN:nPower delivery via rear pogo connector (13-pin), Communication via rear I/O connector (4x40-pin), Expander: DC In: 1 x 6-pin 1B LEMO socket, 3G-SDI Output: 1 x 75 Ohm BNC, 60 Hz max frame rate, HDMI 1.2 Output: 1 x USB Type-A socket, 60 Hz max frame rate, Sync: 1 x 4-pin 00B LEMO socket (genlock in/timecode in/sync in), Control: 1 x 4-pin 00B LEMO socket (tally out/RS-232 RX and TX), USB Power Output: 1 x USB Type-A socket, 1.5 A, D-Tap Aux Power Output: 3.0 A, Microphone Input: 1 x 3.5 mm stereo jack, Headphone Output: 1 x 3.5 mm jack
24-bit, 48 kHz, Uncompressed, Unbalanced mic level